|
Tools Recommended: Cordless Drill with 5/16" driver Tin Snips Two 7/16" wrenches Caulk Gun Step One: Attach FIN to BASE ANGLE Note: In case of rib obstruction, base angle is reversible. Assemble with the two supplied ¼" x ¾" SS bolts. Step Two: Installation: Put sealant on bottom of base angle. Place Ventsaver centered behind pipe and fasten with four 1½" lag screws. Step Three: Strap Installation Put ¼" x ¾" bolt through the bent end of strap. Install as illustrated in Top View. Cut off excess strap. For vent pipes, cut pipe off 2" to 3" above Ventsaver. |
|